Hello, we had water leaking into our house from some cracked tiles but the problem has been remedied outside. I just had someone fixing the plaster w ...
We're in an old apartment built in the 70s and there's a strange fireplace/mantel that doesn't actually work. I can't tell if it's been bricked up or ...
We started renovating our home 2 years ago, and as most of you can probably appreciate, when you’re doing most of the work yourselves, then, things mo ...
Hi, Have noticed my toilet seat has 2 holes at bottom on sides at base. On one side has plastic cover and other side is missing cover Is there no cove ...
Hi, We have a back fence that has a gap underneath. Unfortunately the neighbour behind's land drops about 60-80cm below ours. Our dirt is falling int ...
Hi Team
I have removed and internal wall in my 1967 home only to find the Ash floor boards don't flow all the way through. I am looking to cut them b ...
Hi Team,
I am looking to build a 1.8m front yard fence in order to eliminate as much road noise as possible. We've decided on a modern type picket fe ...
Hi, I'm planning to build an office table using the Practa 2200 x 600 x 26mm Acacia Timber Benchtop. If I don't want to use table legs, how do I mount ...
Hi
How do i make a Simple version of this cat enclosure, any ideas please and what materials would i need It doesnt need to be as high but needs to ...
I am planning a low level deck. I understand concerns about rot if there is not enough clearance. Has anyone used joists made of composite material to ...
Hi all - I am trying to make a low picnic table on a budget. I have some old outdoor chairs that are falling apart, and I am hoping to re-purpose the ...
After the previous owners of our house subdivided the block, our backyard was left unfinished.
Together my partner and I set out to transform the ba ...
Hi Guys, I am planning to build a dining table. I am very new to wood working and this is my first project ever. I have done some research and have pl ...
I have standard project home bathroom mirrors that I would like to add a wooden frame to. Unfortunately, I couldn't find affordable corner clamps at B ...
After further research and helpful input from you guys i am now planning to build an approximately 3m x 3m deck (no pergola) over a slightly sloping c ...
DIY July!
We had been wanting to do wainscoting for a while but were unsure where to start. Thankfully it was so simple with the Bunnings team's hel ...
Hi im newbie here, thank you for letting me join this awesome group.
I'm thinking to build outdoor bench using mgp10 untreated pine and metal pipe leg ...
Hi
Looking to partially enclose a carport and am getting confused over what type of plasterboard to use. The sheets would be in the elements (rain, ...