We started renovating our home 2 years ago, and as most of you can probably appreciate, when you’re doing most of the work yourselves, then, things mo ...
Hi,
I will soon be having a new kitchen installed and in order to save on the budget, i will be doing the removal of the existing kitchen with my so ...
Hello,
We have a kaboodle 900mm rangehood cabinet that we need to fit a 600mm slideout ranghood into (Westinghouse WRR604SB). Is there an easy way t ...
Hi,
I am very new to doing this sort of thing. I am putting together a sort of kitchen island/peninsula. I have an appropriate sized piece of Kaboodl ...
I want to replace the wooden benchtop of two cabinets in my kitchen. They are separate (not connected). I would like to buy wood from bunnings and i k ...
I am replacing my kitchen benches with Kaboodle 2400 x 600 x 36mm Hevea Timber Benchtops. I will need to cut it to size myself as the lead time for sp ...
I just bought a new little house and it has an old kitchen (I think it is about 20 years old). It's been an air bnb and I'm going to keep using it as ...
hi there
we have existing bunnings timber bench tops which are pre-stained a dark colour. I would like to know if it’s possible to sand these back t ...
Hi
I would like some advice for a novice on a budget.. doing a house up to sell. I would like to update the beige and yellow tiled backsplash, prefe ...
Hoping I could get some ideas of what I could put over the concrete to make benches look new or paint ideas?
Also if anyone knows of a kitchen or h ...
Hi all. I have ugly brown laminate bench face and kitchen cupboards inherited from previous owner who had 90s taste. I would like to cover with panels ...
Hi everyone,
I just joined the community as I recently bought a house which needs a bit of TLC .
I can't afford to pay for every single tasks that ne ...
I am planning to seal my heaves timber bench tops as soon as they come and then sealing cut surfaces as they are done. This is to avoid accidental sta ...
Hi!
We're owner-builders doing as much DIY of our reno as possible. Our home has been restumped and 19mm yellow-tongue placed through most. Above this ...
This is my fridge gap and I’m looking at getting a new fridge. The gap is small and the fridges I’m looking are taller than the gap.
I have removed ...
Hey Everyone, like to check best way to sand routed wood (marked area)and keep the details. I am afraid of losing or inconsistent details/curve. Can i ...
Hi BrainsTrust,
Recently bought a house and it is in desperate need of a face lift. We’re wanting to remove this decorative wooden arch way to open u ...
This is an old Kitchen rebuild project from 2009 I have Ummed and ahhed about posting it as the photo quality isnt the best. But decided if it helps s ...
Hi folks,
We are wanting to do some work on our kitchen. Following are the things we would like to do. This is going to be one at a time.
A. Changin ...