Workshop
Start a discussion
since February 2018
yesterday
r23on
r23on
Experienced Contributor
  • My latest posts
  • Posts I liked
  • My liked posts

User's latest posts

r23on
Experienced Contributor

Hi JennThank for the feedback Currently travelling around Aus sorry for the late reply. These joints can not be done by hand and require a jig to cut ...

r23on
Experienced Contributor
1 reply

I have had a look at a range of drawer runner supliers and unable to find a supplier who provides this type of runner. The only suggestion would be to ...

r23on
Experienced Contributor

@kate1 hi you asked for some tips on building a bridge 1. i did a search of the net for free plans on building a garden bridge and there are heaps 2 ...

r23on
Experienced Contributor

This will be hard work but if you have a hand plane mark all high spots and plane them off. as pointed out hope the slab is well dried out

r23on
Experienced Contributor
3 replies

Hi Lizard77I am with Brad on this I have a Uni Mig 3 in one but do not use the stick. now I only use the Mig much easer and cleaner. Not as cheap as a ...

r23on
Experienced Contributor

Doesen't time fly I have been kept busy with the construction of a CNC router. A colleague of mine at the shed and I have had our hands full with this ...

r23on
Experienced Contributor

Hi Petros 2017Good questions No to both questions No Plans no measurements I checked out the net found a site with some sizes and then scaled up from ...

r23on
Experienced Contributor

Went to Bowens today and got what i need Thanks

Posts user liked

Brad
Valued Contributor
2 replies

Bowens Meranti MERANTI KILN DRIED DAR 235x12mm - MLMKD235012$37.5 /LM

Wayne
Super Contributor
2 replies

I have a few of these storage containers for screws and small parts, I decided to make a trolley that holds 8 of them for easier access.I had the mela ...

Adam_W
Super Contributor
22 replies

Well after months of delays due to everything from weather to design changes to me breaking my leg on-site… (yes, still in plaster…) we finally have o ...

kel
Experienced Contributor
3 replies

Decided winter was a time to be indoors, so i decided to do a bit of toy making, which resulted in my wife taking orders for me to build 20 piggy bank ...

Community Manager Jason
Community Manager
1 reply

The timber looks beautiful @r23on. Looking forward to seeing the end result. The jewellry box with finger jointing that you shared earlier in the ye ...

User's liked posts

r23on
Experienced Contributor

Hi JennThank for the feedback Currently travelling around Aus sorry for the late reply. These joints can not be done by hand and require a jig to cut ...

r23on
Experienced Contributor
1 reply

I have had a look at a range of drawer runner supliers and unable to find a supplier who provides this type of runner. The only suggestion would be to ...

r23on
Experienced Contributor

This will be hard work but if you have a hand plane mark all high spots and plane them off. as pointed out hope the slab is well dried out

r23on
Experienced Contributor
3 replies

Hi Lizard77I am with Brad on this I have a Uni Mig 3 in one but do not use the stick. now I only use the Mig much easer and cleaner. Not as cheap as a ...

r23on
Experienced Contributor

Doesen't time fly I have been kept busy with the construction of a CNC router. A colleague of mine at the shed and I have had our hands full with this ...

r23on
Experienced Contributor

Went to Bowens today and got what i need Thanks

r23on
Experienced Contributor

Hi Try this site it is as basic as it gets. But I would get a table top from bunnings instead of the planks for the tophttps://www.mycarpentry.com/cof ...

r23on
Experienced Contributor
11 replies

My how time flys when yah having fun. I have been trying some new joint methods "Isoloc" So i though I would start with another jewellery box because ...

Contact Me
Online Status
Offline
Date Last Visited
yesterday