Hi Folks,
I have installed timber sleepers on top of the existing retaining wall to offer some seating space (refer to pictures below). Unfortunatel ...
Thank you Mitchell, What type of angle grinder blade would I need to cut up the existing surface (concrete) to get a flush seal? I assume I would need ...
Hi folks,
Just had a new roller shutter installed onto my carport. Looks and works amazing but there is one thing that keeps popping up when I look ...
Hi everyone,
I have 150mm x 50mm sleepers which are used as boundaries for outdoor hedges. The sleepers are supported in place by garden stakes. It ...
Hi folks,
Any suggestions on what product to use to fill in this gap between the house wall and carport slab? (refer to the picture below) Note. Th ...
Thanks, @MitchellMc , if I was okay with a subtle difference could I use something like this to repair it? https://www.bunnings.com.au/selleys-gap-fil ...
Hi @Yangaz,
If you use clamps with more force, like G-clamps then you could potentially re-align the sleepers. I don't believe they will warp back b ...
Hi @Yangaz,
I completely agree with your assessment. It's common for installation surfaces to have some unevenness, and it's great that you're proac ...
Hi @Yangaz,
It could be a combination, but there is definitely some insect damage there, indicated by the unusual tunnel-like patterns. If you're in ...