No luck yet. Tried the fishing line and it catches at the height of the first screw, almost as if there's something in there. I pushed a sharp thin ...
Photo attached below. Basically the ground has dropped by about 10mm and the rough plan is to lift the glass level. The issue is, the screws are loo ...
Hi, I need to lift a panel up about a cm. The screws are loose but the glass is stuck to the rubber/plastic packer. Any ideas on how to remove/loose ...
Hi @ADV
I suggest getting an extra pair of hands to hold the glass up from the bottom while trying to do the fishing line technique. I suspect that ...
I suggest checking for the possibility of a protective sleeve running through the spigot and the glass. If so, you'll need to make or find a wooden pu ...
Hi @ADV ,
@EricL idea using WD40 is good, just to add to this, try running a fishing line between the glass panel and the rubber support, this should ...
Just in case it was unclear, I am suggesting to lift the glass (& spigot) by levering it up from the tile next to the one with the spigot. Then packin ...
