Hey @rookieDIY thanks for your feedback I appreciate that. For this build I used my Pallet lever to pull the pallets apart. A hammer to de-nail and a jimmy bar also to de-nail. (The extra leverage helps for the stubborn nails).
I used my drop saw to cut everything to length and then 2 drills, 1 to pilot drill and my impact driver set to a low setting (if you have the option, depends on the drill) to avoid splitting out the pine as I was screwing close to the ends of the timber.
hope that helps
Thanks for joining in the discussion and great to see you get such a prompt reply from Marty. Welcome to the community!
Please feel free to post anytime you need a hand or have a project to share. We have loads of members who are happy to share their experience and knowledge. And please let me know if you ever have any feedback about how we can improve Workshop for you.