Share
Hi everyone,
I have done epoxy on my garage and i have done one one coat of paint and put all the flakes as well now the paint is all dry and all set but i am not happy with the finish i should’ve done 2 coat of paint and then put the flakes.
What are the possible ways i can fix my garage floor ( i want to do another coat of paint and the put flakes)
Welcome to the Bunnings Workshop community @kritin. It's sensational to have you join us, and many thanks for your question on epoxy coatings.
You can coat over the existing work, and I'll include the method below:
- Lightly sand the area of the epoxy with 120 grit sandpaper to improve the surface adhesion for the next coat.
- As advised you can purchase a sanding block on a handle to make sanding easier.
- Vacuum any dust that remains after sanding.
- Wipe down the area with isopropyl alcohol or general-purpose thinners.
- Ensure to follow the correct induction and pot lifetimes based on the ambient temperature.
- Follow the instructions – Mixing Part A (Base) with Part B (activator)
- Use a 12 to 15mm nap microfibre roller to apply the epoxy to your floor.
- Leave the floor for 7 days to properly cure.
Please let me know if you have further questions.
Mitchell
