Workshop
Start a discussion

The Bunnings Workshop community can help with your home improvement projects.

How to brighten up that old outdoor furniture

Highlighted
Established Contributor

How to brighten up that old outdoor furniture

Have no fear and take a risk. I had an old bench seat that was pretty shagged after years in the weather numerous pot plants decorating it. It resembled my neighbours but two slats had rotted through and a handle was falling off. Some slats in the back had rotted out.  It’s was destined for the bin but I needed something to do so broke it down and replicated the rotten bits using opposite end pieces etc which I cut out of short sticks of pine I picked up from Bunnings. Some screws to replace the original dowels and glue. It firmed up good but the mix of timbers Kwila / merbau and pine didn’t Look great.

 

if you get this far forget the stains. PAINT.


Tools my trusty ozito 18volt drill and circular saw stainless screws and sellers exterior pva. 
A good undercoat with British Paints water based 4in1primer sealer undercoat and then the magic happened bright orange Dulux water based enamel from the paint crew at Bunnings semi gloss gave a hive surface and the satin finish hid the imperfections from my wood work.

 

 

 

F4373F1B-3706-4242-9FD4-27B1826F64B1.jpeg

 

33505F5D-168D-4746-AB62-3B989591997E.jpeg

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects