The Workshop community can help with your home improvement projects.
You must be a registered Workshop community member to comment. Please join Workshop or sign in to join in the discussion.
Looks great @moshiach77, well done to you!
looks great. How do you cut that wrought iron ?
Fantastic work @moshiach77, many thanks for sharing this project with the Workshop community. We look forward to seeing the other two raised beds you are making.
Now I'm back from holidays, please let me also extend a very warm welcome to Workshop. We're really pleased you could join us and look forward to seeing more of your handiwork. Feel free to post whenever you have something to share or need a hand. And please let me know if you ever need help getting the most from the site or have any feedback about how we can make Workshop even more useful to you.
Thanks for joining in the discussion @fishingfan. I'm sure @moshiach77 will get back to you as soon as possible and answer your question about cutting the corrugated sheeting. I'll also tag some other handy Workshop members like @Brad, @ProjectPete and @redracer01 for you who also might have some advice.
Welcome to Workshop. Please post whenever you need assistance with a project or have something new to share. We look forward to reading all about your projects and plans.
Traditional way is to use niblers, I have a metal cutting circular saw and you could also use a multitool or a jigsaw. A cutting disk in an angle grinder will do it but you will have to live with the bur it leaves and either cover it or clean it up and keeping the cut straight can be a problem. Snips if you like a manual option.
Another useful thing is a guide clamp. https://www.bunnings.com.au/craftright-50-aluminium-clamp-and-cutting-guide_p5860136
Nice work @moshiach77 - given the fact the cut ends are covered/concealed, I'd probably just rip through it with an angle grinder and give yourself an opportunity to practice cutting straight lines on wonky material.
Otherwise @Brad's suggestions all work too
thanks for the advice
another job added to the list
@fishingfan I used 1mm cutting disk on an angle grinder and clamped a piece of angle iron to the sheet as a guide.
Thanks again for sharing this project @moshiach77. It's already proved very popular.
Visitors might also like to check out our Top 10 most popular raised garden beds on Workshop.
This looks amazing, any chance for the plan?
Looks great - do you by chance sell them?
Hi @Duckers1 and @Dutchy73,
Let me tag project creator @moshiach77 for you so they are alerted to your questions. Great to see you are inspired by their work.
Let me also extend a very warm welcome to the community to you both. Please feel free to post anytime you need a hand with a project or have something to share. We have lots of helpful members who are always happy to share their experience and knowledge. And please let me know if you need assistance getting the most from the site or have any feedback about how we can further improve Workshop for you.
All the best,
Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects
My back isn't what it used to be, and to be honest, it didn't used to be much good anyway. So when I found myself hunched over my already raised assem ...
Looking for some advice over a bathtub that's developed some cracks (i think) over some time.
Bathtub Close Up
Ive been meaning to do this for a while - My front yard only has x1 impact sprinkler - it really needs at least x2 (my backyard has x4 semi-permanent ...