Workshop
Start a discussion

Topics with Label: Tools and Equipment

Nadine1
Budding Contributor
11 replies

Hello all! I am wanting to stain my deck with as little effort as possible haha. I've attached some pictures, I have no idea what type of wood it is e ...

Community Manager Jason
Community Manager
1 reply

Loved the story on Channel 9 last night with the bloke who set up a fan club dedicated to the mighty mini Jumbuck Small Rondo Charcoal Spit Roaster. ...

Chaks_DIY
Established Contributor
6 replies

Hi all I'm looking to install some screening using some vertical timber posts 100mmx100mmx2.2m I was planning on using screws. Some into the sleeper ...

mharper
New Contributor
6 replies

Hi, I am building a low deck with inline joists using joist hangers (to keep the height as low as possible). As I am picture framing the decking, I n ...

Chaks_DIY
Established Contributor
8 replies

Hi all. I'm looking for advice on painting external timber. We have decided to paint the balustrade and railings on our stairs leading to the backya ...

Sharath
New Contributor
3 replies

Hi, I'm building a retaining wall with 7 steel's posts. The posts are 1.8m apart. I'll be using timber sleepers in between. How do I provide support t ...

Noyade
Experienced Contributor
3 replies

Around 500 metres from my home is a service station that refills gas cylinders. Rather than carry or drive there, I stole an idea from Bunnings and bu ...

respectre
Newbie
1 reply

I have a small courtyard. I am not allowed to permanently affix anything to external walls or fences ie with nails. Need ideas for decor, shade and pr ...

lbell
Budding Browser
1 reply

Hi I am looking for instructions to make a wooden pool pump cover. Can you help?

kylevuong
Budding Browser
1 reply

Hi guys, I'm first time user here. During the lock down my local gym was closed and so as the playground. Therefore I would like to ask about buildin ...

binaryzer0
New Contributor
3 replies

Hi folks , Just wanted to get some input from you on how to protect this timber. We have this open in drive way forming a wall but I can see water i ...

JezFletcher
New Contributor
10 replies

Purchased this washer from Bunnings yesterday. Following the setup instructions, I've been running water through it without turning on the pump, in or ...

itoen
Occasional Browser
1 reply

I recently bought this product from bunnings https://www.bunnings.com.au/windoware-2-1m-outdoor-roll-up-blind-1500mm-x-2100mm-northern-sands_p1262093 ...

Lassy
New Contributor
6 replies

Hi Everyone With all of these winds we have been having my wooden fence decided that it would be the perfect time to break. I am struggling to pop it ...

ftimon
Frequent Browser
1 reply

Hi, I would like know if I can get a wood plank cut for size of 28*12 inch for my car to fix few amplifiers.

EV77
Budding Contributor
6 replies

We just had a new timber fence installed and I want to protect the bottom from rot. The fence is in a dark damp section where water runs off into the ...

volksi67
Newbie
1 reply

Hi I recently purchased black lattice as a CV fence covering 0056908 . My question is how best to attach it to a colourbond fence.

salx
Regular Browser
4 replies

I have merbau edging on the frontyard lawn that boxes a 10 by 12.5 ft artificial turf. It's been installed over 6 months ago and have been weathered b ...

Kevin65
Budding Contributor
9 replies

Hi FolksLooking for a couple of tips please.Finally finished paint stripping our back deck.The timber is treated pine.Too many nails were too hard and ...

Adao1978
New Contributor
5 replies

      Hi Im needing some advice what would be causing a rusty looking stain on 4 month old unsealed exposed aggregate. It has only coming through o ...

queage
Newbie
1 reply

Hello all!I'm completely new to PVC pipings and whatnot and would like to ask if anyone can recommend what is the quickest way to have this set of pip ...

vica
Established Contributor
5 replies

Good day ! My fence is weathered. I am considering to fill cracks and then Sand ,at last paint. Can I use wood hardener first and fill? By the way ,th ...

jays2007
Budding Contributor
6 replies

Hi guys, anyone had any experience with the otter ground screws? Was looking at these as an option for ground level deck... https://www.bunnings.com.a ...

malkyfaith
Newbie
2 replies