Workshop
Ask a question

Topics with Label: Doors and Windows

Steve5
Having an Impact
12 replies

I've got a new shed with 4m wide roller doors with ember guard brushes at the top that aren't long enough. The ember guard brushes are about 9cm long ...

Kvic
Having an Impact
3 replies

I have been fixing up the Garage Door as it had stopped working and had to replace the cable pullies and cables, bent brackets and retention the sprin ...

praba
Finding My Feet
2 replies

Hi Team, I got quite a space between garage door and floor which is causing a bit of flooding during rains. Appreciate any help on how I can seal th ...

ben1984
Finding My Feet
3 replies

Hi, I'm looking at installing the Chamerlain rollerlift plus (https://www.bunnings.com.au/chamberlain-rollerlift-plus-roller-garage-door-opener_p013 ...

dean3
Just Starting Out
6 replies

Hi i I have a Reflecta garage door insulation kit to fit, wondering what is the best silastic to use to stick the 10 mm insulation to the roller door ...

mikebarker
Having an Impact
74 replies

Hi all, I am about to build a small wooden garden storage shed (3m wide x 2.4m deep) on a gravel base. I have been soaking up tutorials, reading the v ...

NumeroUno
Cultivating a Following
1 reply

Hi My manual garage door latch has snapped off on the right and partially off the left side. I need to securely reattach so I can lock/unlock it. As ...

nels
Growing in Experience
5 replies

The outside of the garage door has not weathered well and top edge of the door has peeled away from the door exposing the latices wood underneath. Are ...

TestNameHello
Just Starting Out
1 reply

I'm trying to install the Garage Door Weather Seal for Gliderol Doors that I bought from Bunnings. However I can't seem to install it on the garage tr ...

ryan101
Just Starting Out
2 replies

    hi I was broken into I need to replace cheap door just a circle handles and two notches hinges?cash  

DarylS
Growing in Experience
1 reply

Hi all, I've built an EasyShed but would like a sliding door on the front instead of the two swinging doors they come with. I've attached pictures fo ...

bluesue
Getting Established
10 replies

Help needed, how do I attach the Ametalin 1350mm x 6.67m Thermal Liner to my tin roof or back or garage roller door? Thanks

Clunk0r
Getting Established
2 replies

I have a shed that already had a this lock in it. It doesn't have an exterior door handle. Do I need to replace the entire door lock or is there a ...

niru2011
Just Starting Out
1 reply

I have a outdoor doorway into a garden shed that needs framing and a door installed. To avoid maintenance, I would like to make this out of a composi ...

nettyb
Finding My Feet
2 replies

We're going to fill in an open window in our brick garage - thinking of using the James Hardie Fine Texture Cladding. We want to be able to install ra ...

joejoe
Growing in Experience
2 replies

Hi. I need a rental friendly way too keep things from entering underneath a storeroom located outside which has no protection from rain, pets  etc.

brendawebster44
Making a Splash
2 replies

Hi everyone and happy Christmas. I saw a device that I can attach to my garage door. I am in a lot of pain with my shoulders and I am finding it harde ...

jamor
Getting Established
3 replies

Hi there, I’m looking for some help choosing the right door as there are so many options it can get confusing and overwhelming! I am converting an a ...

YADA
Finding My Feet
4 replies

The bottom of the timber at the garage door entrance was damaged by using the whippersnipper to get rid of weeds. Is this a termite risk? What materia ...

shelld2
Just Starting Out
1 reply

 the tongue slide does not slide properly, it comes out of the railing when fully pushed back.

davidpaton
Just Starting Out
4 replies

Existing externally located steel fame is set in single brickwork and has corroded around the bottom hinges area.Size - to fit existing double doo ...

BigFella1956
Building a Reputation
11 replies

Hello Everyone!, I have a steel garden shed, 6m X 3m. Today, the left opening door (when looking front on) was caught in strong wind and the door was ...

ivanptr
Making a Splash
3 replies

The garage door has been opening and closing without us using the controls. I've had to turn the power off to the unit because it keeps opening. Somet ...

RK07
Growing in Experience
5 replies

Hello Team, I'm seeking advice on the most effective method for sealing my garage door to prevent dust infiltration. I am attaching garage door pics ...