Workshop
Ask a question

The Bunnings Workshop community can help with your home improvement projects.

Doors and Windows

sarahd100
Community Newcomer

I have two Spotlight ceiling mount curtain rails to fit the length I need. One will be shortened by cutting W hacksaw. The thing is, I'm curious if it ...

AmandaAquilina
Finding My Feet

Hi , I attempted to paint our barn door today and unfortunately after 1 coat of cabots stain and varnish on my maple door it has come out blotchy . T ...

badmojo
Finding My Feet
5 replies

Hi, The bottom aluminum frame of our exterior garage door is not sealed and causes water to come in to the garage. Any suggestions on sealing this ...

deebra
Just Starting Out
6 replies

how can I get old film off my window. I have tried almost everything and still won't come off?  

rev1
Just Starting Out
1 reply

Hi there, attaching images of my washroom door where paint at the bottom of the washroom is peeling away due to water from every time the washroom is ...

1250
Finding My Feet
8 replies

My front door does not fit tight to the frame therefore allowing a draught to come into the house. The space is around the entire door including the b ...

David4321
Finding My Feet
22 replies

     Heavy rain comes in the top of our timber windows. Have tried numerous rubber sealants. Any ideas or suggestions? Many thanks Bunnings R ...

firsthome2022
Growing in Experience
3 replies

Mice are coming in through these end haps on my garage roller door. I just paid to have the seal replaced as i thought a new seal would cover these ga ...

KarenMM
Just Starting Out
1 reply

A couple of window sills in my home are very weathered from sun damage and in a bad state with cracks in the wood. The sills are not rotten (yet) and ...

lexnicjam
Just Starting Out
3 replies

Hello everyone, I bought this blind from Bunnings maybe 18 months ago and it has been great. Just recently it has started to become very stiff to pul ...

guyrat7
Just Starting Out
2 replies

Hi, we have these old aluminium windows. I want to replace the old window in the kitchen with a new. The counter top tiles are installed against the r ...

Olivia22
Just Starting Out
3 replies

Hi I’m looking to remove the old steel frame on our wardrobes inside one of our bedrooms. I don’t know how these come together or how they come apart ...

badmojo
Finding My Feet
2 replies

Hi, Bottom side of our exterior garage door is not sealed for water ingress. Any paint or sealant suggestion to seal this? Water has caused the door t ...

Diana100
Just Starting Out
3 replies

Can I still fix a door latch that is not working? Based on the photos, is this broken or can still be fixed? Thanks!    

lavanyap
Just Starting Out
3 replies

Hi i am unable to close or open the shower door. I need to lift the door a bit up and then close. Need to follow same technique to open. Lifting up is ...

Shane
Having an Impact
18 replies

I have old steel frame windows at the front of my brick house and all of the substance that is I assume supposed to be holding the window glass in and ...

JoeAzza
Kind of a Big Deal
1 reply

Just upgraded a standard sliding door lock to a deadlock one. The original holes on the were too far away to allow latching securely, I had to elongat ...

theDIYedit
Making a Splash
3 replies

I would like to share my recent project - I am so happy with how it turned out, despite my husband (Lee) and I not doing anything like this before! It ...

bluesue
Getting Established
12 replies

Help needed, how do I attach the Ametalin 1350mm x 6.67m Thermal Liner to my tin roof or back or garage roller door? Thanks

KirstG
Just Starting Out
4 replies

Our garage opens onto a slope and when it was built the garage door not custom built. There is 13ft where the gap ranges from 1-6.5 inches. The previo ...

Jeffersm963
Finding My Feet
2 replies

Hi, I have been given the schematic in the photo by the garage door people I will be engaging as to what I need to do to create the opening for the ...

elbow
Getting Established
23 replies

hey guys - i've been here asking a few related questions and some of the helpful answers are now leading me to this question. I had new PVC windows fi ...

Tiarna
Just Starting Out
2 replies

I just had a new door installed in my home. While the man was putting the door up he said a stain would need to be put on it. It's my front door so I ...

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects