Hi im newbie here, thank you for letting me join this awesome group.
I'm thinking to build outdoor bench using mgp10 untreated pine and metal pipe leg ...
Hi
Looking to partially enclose a carport and am getting confused over what type of plasterboard to use. The sheets would be in the elements (rain, ...
Hi, We have a back fence that has a gap underneath. Unfortunately the neighbour behind's land drops about 60-80cm below ours. Our dirt is falling int ...
I have standard project home bathroom mirrors that I would like to add a wooden frame to. Unfortunately, I couldn't find affordable corner clamps at B ...
Hi there,
Any advice on this would be greatly appreciated... We are building a new deck in an area with pavers in the back. We have an uneven area of ...
Hello,
I'm looking for suggestions on how to tackle the sloped area between my fence and driveway, especially since there aren't enough retaining wa ...
Hi there, I have a tiled laundry in a fairly new build and, unfortunately, the laundry is in the middle of the house so no direct access to outside. T ...
Hi, I'm planning to build an office table using the Practa 2200 x 600 x 26mm Acacia Timber Benchtop. If I don't want to use table legs, how do I mount ...
After further research and helpful input from you guys i am now planning to build an approximately 3m x 3m deck (no pergola) over a slightly sloping c ...
A couple of weeks ago, I picked up a little anvil for a very reasonable price off Facebook Marketplace. Now while I had no immediate need for an anvil ...
Spray Tan Salon renovations / advice on skirting boards.
Hi everyone. I am in the process of renovating what used to be my garage, however, it is now ...
My wife has bought a full Murphy bed kit, all except for the timber bits. Attached is the overall look of the bed from their Instruction booklet.That ...
Hi there,
im looking to fence off an area for my chickens. I’d like to use t posts and welded wire chicken mesh. Are there any posts or videos on this ...
Hello,
We have a kaboodle 900mm rangehood cabinet that we need to fit a 600mm slideout ranghood into (Westinghouse WRR604SB). Is there an easy way t ...
Hi,Have been looking at ways that I can limit the amount of water around the the first level of bricks in the images. Would it cause any issues to do ...
Hello,
I just had a concrete slab laid in preparation for installing a 4.5m x 1.5m Build-a-Shed that I purchased from Bunnings. What is the suggeste ...
I need something better than glue. Any suggestions please. Hello. Recently we had our roof tiles replaced.The roofer used the concrete roof over the ...
Due to limited space, we converted our garage into 2 beautiful bedrooms by exposing the character of the existing natural timber beams originally sou ...
Hi there,
Just planning a new project here. I have this poor old shed on my property and I am looking at re-cladding it. I am getting an asbestos rem ...