Comments
Isobel
Trusted Contributor

Looks great @moshiach77, well done to you!

fishingfan
New Contributor

looks great. How do you cut that wrought iron ? 

Community Manager Jason
Community Manager

Fantastic work @moshiach77, many thanks for sharing this project with the Workshop community. We look forward to seeing the other two raised beds you are making. 

 

Now I'm back from holidays, please let me also extend a very warm welcome to Workshop. We're really pleased you could join us and look forward to seeing more of your handiwork. Feel free to post whenever you have something to share or need a hand. And please let me know if you ever need help getting the most from the site or have any feedback about how we can make Workshop even more useful to you.

 

Thanks again,

 

Jason

 

Community Manager Jason
Community Manager

Thanks for joining in the discussion @fishingfan. I'm sure @moshiach77 will get back to you as soon as possible and answer your question about cutting the corrugated sheeting. I'll also tag some other handy Workshop members like @Brad@ProjectPete and @redracer01 for you who also might have some advice. 

 

Welcome to Workshop. Please post whenever you need assistance with a project or have something new to share. We look forward to reading all about your projects and plans.

 

Jason

 

Brad
Valued Contributor

@fishingfan

 

Traditional way is to use niblers, I have a metal cutting circular saw and you could also use a multitool or a jigsaw. A cutting disk in an angle grinder will do it but you will have to live with the bur it leaves and either cover it or clean it up and keeping the cut straight can be a problem. Snips if you like a manual option.

 

Another useful thing is a guide clamp. https://www.bunnings.com.au/craftright-50-aluminium-clamp-and-cutting-guide_p5860136

ProjectPete
Valued Contributor

Nice work @moshiach77 - given the fact the cut ends are covered/concealed, I'd probably just rip through it with an angle grinder and give yourself an opportunity to practice cutting straight lines on wonky material.

 

Otherwise @Brad's suggestions all work too

fishingfan
New Contributor

thanks for the advice

another job added to the list 

moshiach77
New Contributor

@fishingfan I used 1mm cutting disk on an angle grinder and clamped a piece of angle iron to the sheet as a guide. 

Community Manager Jason
Community Manager

Thanks again for sharing this project @moshiach77. It's already proved very popular.

 

Visitors might also like to check out our Top 10 most popular raised garden beds on Workshop

 

Jason

 

Dutchy73
Newbie

 This looks amazing, any chance for the plan?

 

Duckers1
Newbie

Looks great - do you by chance sell them?

 

Community Manager Jason
Community Manager

Hi @Duckers1 and @Dutchy73,

 

Let me tag project creator @moshiach77 for you so they are alerted to your questions. Great to see you are inspired by their work.

 

Let me also extend a very warm welcome to the community to you both. Please feel free to post anytime you need a hand with a project or have something to share. We have lots of helpful members who are always happy to share their experience and knowledge. And please let me know if you need assistance getting the most from the site or have any feedback about how we can further improve Workshop for you.

 

All the best,

 

Jason