The Workshop community can help with your home improvement projects.
You must be a registered Workshop community member to comment. Please join Workshop or sign in to join in the discussion.
This is great, many thanks for sharing @LePallet.
Bunnings is going to feature your fantastic work on the playhouse in an upcoming email to its subscribers. What tips could you share with readers who might be interested in replicating your project? And what materials did you use?
Oh awesome @Jason
A few tips would be first, if you were wanting to make this as cheap as possible,finding scrap timber ia the thing to do. This can be done on Facebook Marketplace, Gumtree is at house job sites. I just go around to job sites and ask the boys if they have any off cuts they are not using or any timber left at the end which works well. I used 90x35 pine but 70x35 is good also for the walls and roof frame. There are also roofing materials available so don’t be afraid to ask. Also the roof pitch was 45 degrees, makes it easier when marking at cutting all the angles
We built the walls and floor seperate as we needed to transport the cubby in sections, then we built the roof last and attached that to the walls. Make sure all the edges are sanded well to save splinters for the kids.
Pine 90x35, 70x35
Treated Pine Plinth Boards 150x25
Upcycled pine floor board (flooring)
Colourbond Roof + Flashings
Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects
We have an entrance door at the bottom of a sloping ground. Each time when it rains, water, mud and debris run down the slope and collects just outsid ...
Hi, I'm building a sleeper letter box, I don't have any power tools but I want to know how to actually get the letter box part in the sleeper, its kin ...